dr brown’s steriliser instructions

Do’s and Don’ts for Safe Usage

DO ensure all parts are thoroughly cleaned and rinsed before sterilization․ DO follow the recommended water levels and vinegar solutions for cleaning․ AVOID touching hot surfaces or components during operation․ DON’T use abrasive cleaners that may damage the appliance․ DO descale regularly to prevent mineral buildup․ DON’T leave the steriliser unattended while in use․ DO store the appliance in a cool, dry place when not in use․ Following these guidelines ensures optimal performance and safety while using the Dr․ Browns Steriliser․

Assembly and Preparation

Unbox and inspect all components, ensuring no damage․ Attach the main and hinged lids securely․ Place the steam tray and water reservoir according to instructions․ Add recommended water levels․ Plug in the appliance and set controls for first use sterilization․ Ensure all parts are properly aligned before operation․

Unboxing and Initial Setup

Begin by carefully unboxing the Dr․ Browns Steriliser and inspecting all components for damage․ Remove packaging materials and ensure all parts, including the main unit, steam tray, water reservoir, and accessories, are included․ Rinse the reservoir and steam tray with clean water․ Attach the hinged and main lids securely to the unit․ Place the steam tray inside, aligning it with the guides․ Fill the water reservoir with the recommended amount of water, typically 75-80 mL, and position it correctly․ Plug in the steriliser and familiarize yourself with the control panel before first use․

Disassembling Parts for Cleaning

Before cleaning, unplug the Dr․ Browns Steriliser and allow it to cool․ Remove the water reservoir and empty any remaining water․ Take out the steam tray and carefully lift out the bottle holders and accessories․ Soak all parts in a mixture of 80 mL white vinegar and 30 mL water for 10-15 minutes to loosen mineral deposits․ Rinse thoroughly with clean water and dry each part before reassembling the unit to ensure optimal performance and hygiene․

Operating the Dr․ Browns Steriliser

Operating the Dr․ Browns Steriliser involves filling the water reservoir, placing bottles inside, setting the timer, and starting the sterilisation cycle for effective results․

Step-by-Step Usage Instructions

• Ensure all bottle parts are disassembled and cleaned thoroughly before sterilisation․
• Place the bottles and accessories in the steriliser, avoiding overcrowding․
• Add the recommended water level to the reservoir․
• Select the appropriate sterilisation cycle using the electronic controls․
• Start the cycle and let the steam technology sanitize the items․
• Once completed, allow the steriliser to cool slightly before opening․
• Remove the sterilised items carefully, ensuring no parts touch hot surfaces․
• Store the items in a clean, dry place or use immediately for feeding․

First Use and Maintenance Tips

Before first use, unpack and wash all parts with soapy water․ Rinse thoroughly and dry․ For initial setup, run a test cycle with water only to ensure proper function․ Regularly clean the steriliser by pouring a mixture of 80 mL white vinegar and 30 mL water over the heating element․ Descale every 1-2 months to prevent limescale buildup․ Always unplug the device before cleaning and store it in a dry place after use to maintain hygiene and longevity․

Cleaning and Maintenance

Regularly clean with a mixture of white vinegar and water․ Rinse all parts thoroughly after each use and dry to prevent moisture buildup․ Descaling every 1-2 months maintains efficiency․

Daily Cleaning Routine

After each use, rinse the steriliser with warm water․ Mix 80 mL white vinegar with 30 mL water and pour over the heating element; Let it sit for 5 minutes, then rinse thoroughly․ Clean all detachable parts with mild soap and warm water․ Dry completely to prevent moisture buildup․ Regular cleaning prevents mineral deposits and ensures optimal performance․ Always follow the manufacturer’s instructions for daily maintenance to keep your steriliser in good working condition․

Descaling and Deep Cleaning

Regular descaling is essential to remove mineral buildup․ Mix 80 mL white vinegar with 30 mL water and pour over the heating element․ Let it sit for 10 minutes, then rinse thoroughly․ For deep cleaning, disassemble all parts and soak in soapy water․ Use a soft brush to remove stubborn residue․ Repeat the vinegar solution treatment every 1-2 months to maintain efficiency and prevent scaling․ This ensures optimal performance and hygiene for your steriliser․

Troubleshooting Common Issues

Check for error messages and ensure proper power supply․ If the heating element malfunctions, descale and clean thoroughly․ Refer to the manual for detailed solutions․